13
GB
Using the rotary
commander
The rotary commander works by pressing
buttons and/or rotating controls.
You can also control the optional CD or MD
units with the rotary commander.
By pressing buttons
(the SOURCE and MODE buttons)
Each time you press (SOURCE), the
source changes as follows:
TUNER t CD* t MD* t TAPE t TV*
Pressing (MODE) changes the operation
in the following ways;
• Tuner : FM1 t FM2 t FM3 t AM1
t AM2
• Tape : playback direction
• TV/Video*: TV1 t TV2 t AUX
• CD unit* : CD1 t CD2 t …
• MD unit* : MD1 t MD2 t …
* If the corresponding optional equipment is
not connected, the item will not appear.
continue to next page t
Other Functions
You can also control this unit with the rotary
commander.
Labeling the rotary
commander
Depending on how you mount the rotary
commander, attach the appropriate label as
shown in the illustration below.
SOUND
DSPL
MODE
SOUND
DSPL
MODE
(SOURCE)
(MODE)
To Next Page
Loading...
Need help?
General
