8
2 Press (SHIFT).
The clock starts.
3 Press (SHIFT).
After the clock setting is complete, the
display returns to normal playback mode.
Note
If the POWER SELECT switch on the bottom of the
unit is set to the B position, turn the power on
first, then set the clock.
6
Cassette Player
Listening to a tape
1 Press (OPEN) and insert a cassette.
Playback starts automatically.
2 Close the front panel.
If a cassette is already inserted, to start
playback, press (SOURCE) repeatedly until
“FWD” or “REV” appears.
The side facing up is played.
The side facing down is played.
Tips
• To change the tape’s playback direction, press
(MODE) (*).
• ”Metal” appears in the display when you insert a
metal or CrO
2 tape (Auto Metal function).
To Press
Stop playback (OFF)
Eject the cassette (OPEN) then 6
SET UP
To Next Page
Loading...
Need help?
General
