When you pair a second or subsequent device (the headset has pairing information for other
devices)
When you are wearing the headset, you will hear a notification sound from both headset units at the same time,
and you will hear a voice guidance say “Pairing”. When you are wearing only one headset unit, you will hear the
notification sound and voice guidance from the headset unit you are wearing.
Set the headset units into the charging case.
Leave the charging case lid open.
1.
With the charging case lid open, press and hold the pairing button on the back of the charging case for about 5
seconds or more.
Note
The headset does not enter pairing mode with the charging case lid closed.
2.
To Next Page
Loading...
