Click the [Bluetooth & other devices] tab, click the [Bluetooth] switch to turn on the BLUETOOTH function, and
then click [Add Bluetooth or other device].
3.
Click [Bluetooth].
4.
Select [SRS-XV500].
If a passkey* is required, enter “0000.”
If [SRS-XV500] does not appear, perform the operation again from step
.
5.
The passkey may be called a “passcode,” “PIN code,” “PIN number,” or “password.”
*
After pairing, the BLUETOOTH connection establishes automatically and [Connected music] or [Connected
voice, music] will be displayed on the screen. Proceed to step
.
6.
To Next Page
Loading...
