Soozier A91-178 - Assembly Process; Step 1: Base Frame Assembly

1) Attach the Rear Stabilizer (03) to the Base Frame (01) and tighten by X2 Hex Head Bolt
(30), X4 Washer (34) and X2 Nylon Nuts (38).
2) Attach the Front Stabilizer (04) to the Base Frame (01) and tighten by X2 Hex Head Bolt
(30), X4 Washer (34) and X2 Nylon Nuts (38).
3) Attach the Upright Support Tube (02) to the Base Frame (01) and tighten by X2 hex
Head Bolt (30), X4 Flat Wahser (34) and X2 Nylon Nuts (38).
ASSEMBLY INSTRUCTIONS
STEP 1
8