Sophos AP 55C User Manual

Operating Instructions
7
Wireless Access Points
AP 15C
Scope of supply
Important note: Sophos AP 15C requires Sophos UTM V 9.400 to be installed.
Mounting instructions
The Sophos AP 15C can be mounted on the ceiling. Screws are included in delivery.
Use the screws from the scope of supply or screws whose dimensions correspond
with the mounting holes in the bracket.
1. Mount the bracket on the ceiling
Use the screws and anchors from the scope of supply.
2. Place the access point on the bracket
Place the housing on the bracket and lock it by turning clockwise until stop.
Controls
LED
Green - blinking slowly AP is booting
Green - blinking rapidly Network connectivity
Orange - blinking slowly No connection to the Sophos UTM
Orange - blinking rapidly Firmware update
Interfaces and buttons
12V DC-IN Power
LAN (PoE) 10/100/1000 Base-TX interface
Power
1 x 10/100/1000
Base-TX
Console
Security Notes Ethernet cableSophos AP 15C Mounting bracket Screws and
T-rail clips
Power-over-Ethernet (PoE)
injector + power cord

Sophos AP 55C Specifications

General

Brand	Sophos
Model	AP 55C
Category	Wireless Access Point
Language	English