31AP6 420(E)/840(E)
Operating Instructions
5. Align the Access Point (with fix-plate) via the key holes to the
main bracket and push it to the end in the sliding-slot.
Suspend mount
For suspend mounting, please use the “suspend mounting kit” which is available as an
option from your Sophos partner. The suspend mounting kit must be installed by a skilled
installer.
The kit consists of the following components:
4 ring screws
Anchor feature
Wire gripper
Suspend wire
Secure clip
4 suspend wires with anchor
features and secure clips
Mounting instructions
Screw the 4 supplied ring-screws (M3) into the bracket holes on the rear of the access
point.
To Next Page
Loading...
