Sorelle CAPE COD - Toddler Rail Conversion; Toddler Rail Installation

Fig.2
1. Before Toddler Rail assembly, please Remove Footboard(C) and Four (4) Bolts as per below (Fig.2)
2.Store crib footboard and balance hardware together in a safe place.
MATTRESS SUPPORT MUST BE IN THE
LOWEST POSITION
WARNING:
PLEASE DO NOT TIGHTEN THE BOLTS IN ASSEMBLY PROCESS!
(c) (x4)
c
c
c
c
c
c
1
1
1
132 Toddler Rail Instruction Sheet
SORELLE
Toddler Rail Assembly
Parts and Hardware
(H) 132 Toddler Rail (1 pcs)
(b) M6 x 50mm Allen bolt (4 pcs)
(m) Allen Key (1 pcs)
Page 15