Page 16
Disassembling Crib for Storage
To disassemble crib for storage, follow assembly steps in reverse.
Store all parts and hardware together in a safe place. Store the instruction manual in the supplied
envelope attached to mattress support crossbar for future reference for reassembly.
To clean, use only mild household soap and warm water. DO NOT use bleach or detergent. DO
NOT use abrasive cleaners which can scratch the finish. Use clean soft cloths to wash, rinse and
dry. With proper care, the quality finish will last a long time. Wood surfaces may be treated with
a light application of a good grade of non-toxic furniture polish. Read contents on back of polish
to make sure polish will not harm unit.
Store all parts from Crib, which are not used for Full Size Headboard, in original carton(s) (if
available) to prevent damage and allow reuse.
Cleaning and Storage
Fullsize Bed Conversion (Optional)
Additional Parts and Hardwares
(e) Allen Key (1 pcs)
(A) 216# Bed Rail (2 pcs)
(B) 216# Mattress Support Bar (4 pcs)
( 216# Adult Rail System Not included, sold separately)
(b) Ø4 X 30mm Phillips Screw (16 pcs)
Tool required
Follow all instructions supplied with the 216# Adult Rail System. NOTE: 216# Adult Rail System
is not included. Please see your crib retailer, visit WWW.Sorellefurniture.com or contact C&T
International Inc. for more information.
To Previous Page
Loading...
