© Sortimo International GmbH MA 00057 | 2022-01-11 | 5 8
Installing SoboPro
Step 5 — Attaching lashing eyes
▶ Assign the lashing eyes with their original
screws to the original positions.
Note: The floor panel requires the
installation of a lashing rail. The lashing rail
may need to be raised using shims
depending on the floor of the vehicle chassis.
▶ Determine the number of shims.
Note: The number of shims should ensure
that the floor panel is slightly pressed.
▶ Tighten the original screws using the
required torque.
Note: The respective torque can be found in
the manufacturer's set-up guidelines.
To Next Page
Loading...