Sortimo SR5 - Attaching the block

© Sortimo International GmbH MA 00057 | 2022-01-11 | 5 103
Attaching the block
ATTENTION
Damage to vehicle due to drilling
Components within the vehicle wall could be damaged.
▶ Pay attention to components within the vehicle wall such as
lines, etc.
▶ Use a drill sleeve.
▶ Pay attention to the manufacturer's set-up guidelines.
▶ Only attach to suitable locations.
▹ Stable pillars,
▹ Stable longitudinal beams.
▶ Do not attach to an unstable intermediate support or wheel
housing.
Stable
Unstable
Step 1 — Preparing the EcoFIX brackets
▶ Find a suitable position.
▶ Use a pen to mark the positions on the block
system and the vehicle wall.
▶ Bend the EcoFIX.
▶ Repeat these steps until all EcoFIX brackets
have been prepared for use.