EasyManua.ls Logo

Sorvall RT/T6000D - Warranty Responsibility

Sorvall RT/T6000D
302 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SORVALL®
Centrifuges
Introduction
&
Description
NOTE
United
States
federal
regulations require
that
parts
and
instruments must
be decontaminated before being
transported.
If
a
centrifuge
or rotor to
be
serviced does
not have
a
Decontamlnatlon Information
Certificate attached
and.
In Du
Font's
opinion
presents a
potential
radioactive
or
biological
hazard,
the
Du
Pont
representative
will
not
service
the
equipment
until
proper
decontamlnatlon and certification Is
complete.
IfDu
Pont
receives
a
centrifuge
or rotor
at
its
Service
facilities
which.
In
its
opinion,
is
a
radioactive
or
biological
hazard,
the
sender
will
be contacted for instructions
as
to
disposition
of
the
equipment.
Disposition costs
will
be bome
by
the
sender.
Decontamlnatlon
Information Certificates
are
included in
the
back
of this
manual.
Additional
certificates
are
available
from the local
Account
or
Service
Representative.
In the
event
these certificates
are
not
available,
a
written
statement
certifying
that the
unit has been
properly
decontaminated and outlining
the
procedures
used
will
be
acceptable.
NOTE
The
Service
Representative
will
note
on
the
Customer Service
Repair
Report
if
decontamination
was
required
and,
if
so,
what
the
contaminant
was
and what
procedure was used.
If
no
decontamination
was
required,
it
will
be
so
stated.
c.
Warranty Responsibility
Whenever service
of the
centrifuge is attempted
by
anyone
other
than
an
employee
of
Du Pont
or an
authorized
representative,
the
individual is
assuming
the risk of
voiding
the
centrifuge
warranty,
which is
as
follows:
E. I.
du
Pont
de
Nemours
and
Company
makes no
warranty
of
any
kind,
expressed
or
implied, except as
stated in
this
warranty
policy.
The
SORVALL*
RT6000D.
T6000D. RT6000B, T6000B,
RT6000, and
T6000
Centri¬
fuges
are warranted
to
be
free
from
defects in materials
and
workmanship for
a period
of
one
year
from the
date
of
delivery.
Du Pont
will
repair or replace
and
return free
of
charge
any
part
which
is
returned to
its
factory
within
said
period,
transportation
prepaid
by
user,
and which is found
upon
inspection
to
have been defective in
materials
or
workmanship.
This
warranty
does not
apply
to
any
damage
to
any
Instrument
resulting from:
normal wear
and
tear;
misuse; abuse; use
of electric
currents or
circuits other than those
specified on
the
plate
affixed to the
centrifuge:
or use
of
any
rotor other than those intended for
use
in the
instrument.
Du Pont
reserves
the
right to
change,
alter, modify or
improve
its
centrifuges
without
any
obligation whatsoever
to
make
corresponding changes
to
any
centrifuge previ¬
ously
sold
or
shipped.
1-3

Related product manuals