Need help?Do you have a question about the Sorvall RT/T6000D and is the answer not in the manual?
Overview of the manual's purpose, scope, and conventions used.
Procedures for decontaminating equipment before service.
Outlines the terms and conditions of the product warranty.
Details the features and differences between various centrifuge models.
Lists key technical specifications such as speed, temperature, power, and dimensions.
Provides details on available rotors and their specifications.
Procedures for checking the centrifuge for shipping damage and verifying all parts.
Guidance on selecting a suitable location and physically installing the centrifuge.
Specifies the necessary power supply voltage, frequency, and current requirements.
Identifies and explains the function of all front panel controls and indicators.
Step-by-step instructions for performing standard operational procedures.
Safety precautions and procedures for centrifuging hazardous materials.
Method for retrieving samples if the centrifuge malfunctions during operation.
How to adjust rotor speed based on compartment load mass to prevent failure.
Routine procedures for inspecting and cleaning the centrifuge components.
Instructions for lubricating specific parts like door hinges to ensure smooth operation.
Detailed steps and checks for performing regular maintenance.
Specific checks and calibration for the refrigeration system in applicable models.
Procedure for replacing the temperature and speed control potentiometers.
Instructions for replacing the main control printed circuit board.
Steps for replacing the motor controls printed circuit board.
Procedure for replacing the temperature control printed circuit board.
Steps for replacing the evaporator in refrigerated centrifuges.
Procedures for removing and replacing the gyro assembly.
Step-by-step guide for replacing the centrifuge motor.
Details on available kits for replacing specific PC boards.
Explains the mechanical systems including drive, imbalance detection, and door interlock.
Detailed explanation of the refrigeration cycle and its components.
Describes the motor, gyro action drive assemblies, and their functions.
Overview of the electrical control systems and their governing circuit boards.
Explains how high voltage power is distributed throughout the centrifuge.
Describes the distribution of low voltage power to various circuits.
Explains the operation of the speed control knob for setting rotor speed.
Describes the temperature control system for refrigerated centrifuge models.
Lists and explains errors that can interrupt or prevent a run.
Describes the fault detection and response to rotor imbalance.
Introduces diagrams and PCB layouts for RT6000/T6000 models.
Step-by-step instructions for calibrating critical functions like temperature and speed.
Contains illustrations and lists of replaceable parts for the RT6000/T6000 models.
Provides schematics, wiring diagrams, and component layouts for RT6000B/T6000B models below SN 9101800.
Specific calibration steps for temperature, tachometer, and motor controls for these models.
Contains illustrations and lists of replaceable parts for RT6000B/T6000B models below SN 9101800.
Provides schematics, wiring diagrams, and component layouts for models with SN 9101800 and above.
Calibration steps for temperature, speed, and control boards for models with SN 9101800 and above.
Contains illustrations and lists of replaceable parts for models with SN 9101800 and above.
General| Brand | Sorvall |
|---|---|
| Model | RT/T6000D |
| Category | Laboratory Equipment |
| Language | English |
To Next Page
