Sorvall RT/T6000D - Page 170

SORVALL
®
CENTRIFUGES RT6000 and T6000 CENTRIFUGES
Table 7-6. Parts: Drive Assembly
PN 07588 (keyed to figure 7-9) (continued)
ITEM P/N DESCRIPTION QTY.
22
66680
Screw, Cap, Socket Hex Head, UNC, No. 10-24 x 3/8"
Long
3
23 63019 Lockwasher, Split, 1/4, SST, 0.047" Thick 2
24
61141
Nut, Hex, SST, 1/4-20 3
25
65548
Shock Mount 4
26
12239 Shock Mount, Imbalance Detector (Sold in kit)
1
27
12239 Arm, Imbalance, Shock Mount (Sold in kit)
1
28 61614 Screw, Pan Head, Slotted, SST, UNC, No. 6, SST,
0.031" Thick
2
29
63011
Lockwasher, Split, No. 6, SST, 0.031" Thick 2
30
07584
Gyro Cartridge Assembly 1
31
07587
Gyro Assembly w/o pulley 1
32
07727*
Pulley 2
33
61682
Screw, Set, Hex Socket, Cup Point, Steel, UNC No. 8-
32 x 7/16" :Long
4
34 65572 Loctite 290
A/R!
35
63076
Screw, Cap, Socket Hex Head, SST, UNF No. 10-32 x
1.0" Long
3
36 67832 Brush Holder 2
37
12994
Brush Kit 2
38
67286
Brush Cap 2
39
60751
Flatwasher, SST, 17/64 I.D. x 0.5n O.D. x 0.031" Thick 6
40
67921
Compression Spring, Cad Plate, 0.360 O.D. x 0.44
Long x 0.045" Diameter
3
41
67315
Flatwasher, Nylon 0.562 O.D. x 0.260 I.D. x 0.062"
Thick
6
! As required.
* PN 07227 is a Single groove pulley. If centrifuge has double groove pulley, use kit PN 07728.
Rev. 2/2002 7-44