Sorvall RT/T6000D - Page 285

SORVALL
®
CENTRIFUGES RT/T6000D and RT/T6000B Centrifuges
Serial Number 9101800 and Above
Table 9-8. Parts: T6000B (SN 9101800 and above) and T6000D
(keyed to figure 9-21)
ITEM P/N DESCRIPTION QTY.
1 07994 Access Cover, 1
2
67351
Screw, Phillips, Colored, Pan Head, No. 8-32 x 3/8" Long 4
3
63936
Lockwasher, External Tooth, No. 8, SST 1
4 67381 Insulation, Tape, Vinyl, Closed Cell Foam, 3/16 Thick x 3/8"
Wide
1
5
67301
Transformer, Power 1
6 83051 Overlay, Access Cover 1
7 07684 Seal, Cover, Insulation 2
8
67699
Receptacle, Plug, Three-Prong, 60 Hz, 15A, 250 Vac 1
67379 Receptacle, Plug, Three-Prong, 50 Hz, 10A, 250 Vac 1
9
61095
Flatwasher, No. 4 2
10
63006
Lockwasher, Split, Steel, No. 4 2
11 60463 Nut, Hex, Steel, No. 4-40 2
12 83041 Screen, Wire 1
13 83040 Fan, 115V, 60 Hz*
1
83120
Fan, 220V, 50 Hz (Not available)
1
14
63936
Washer, Lock, Internal Tooth 4
15
60184
Nut 4
16
67378
Power Cord, 60 Hz, 12V, 15A 1
67823
Power Cord, 50 Hz, 250V, 10A
17
66643
Jack, Banana, Double Insulated, Miniature 1
18 67310 Insulation, Tape, Vinyl, Closed Cell Foam, 1/8 Thick x 3/8"
Wide
1
19 68739 Screw, Machine, Pan Head, Slotted, Black Passivated No. 8-
32 x 1" Long (Not available)
1
20
07816
Chute Assembly, Exhaust 1
21
67311
Lockwasher, Split, Black, No. 8 x .040" Thick 16
22
07959
Brake Resistor 1
23
60171
Flatwasher 2
* Beginning in May 1992, the RT/T6000B/D centrifuges can be retrofitted with a harness that shuts the
fan off when centrifuge is in standby (power ON but no run in progress). To retrofit a centrifuge, order
update kit PN 12947 (50Hz) or update kit PN 12946 (60Hz).
Rev. 2/2002 9-73