Need help?Do you have a question about the Soundcore A20i and is the answer not in the manual?
General| Driver Size | 10mm |
|---|---|
| Bluetooth Version | 5.3 |
| Water Resistance | IPX5 |
| Single Earbud Use | Yes |
| Frequency Response | 20Hz-20kHz |
| Microphone | Yes |
| Voice Assistant Support | Yes |
| Total Playtime with Charging Case | Up to 28 hours |
| Fast Charging | 10 minutes for 2 hours of playtime |
| App Support | Yes |
| Wireless Range | 10 meters |
| Charging Time | 2 hours |
Download the soundcore app to enhance your experience with features like Gaming mode, Find device, and EQ tuning.
Choose the ear tips that best fit your ears for optimal comfort and sound quality.
Steps for charging the earbuds and charging case, including initial preparation and connection.
Earbuds power on automatically when removed from case and enter pairing mode.
Connect to your device by selecting 'soundcore A20i / A25i' from the Bluetooth list.
How to manually enter Bluetooth pairing mode by tapping and holding earbud touchpads.
Details on touch control operations for music playback, calls, and voice assistant in TWS and Mono modes.
Earbuds automatically power off when placed in the charging case or after 30 minutes of inactivity.
Instructions to perform a factory reset by holding touchpads in the open charging case.
Explanation of LED light patterns for charging status, battery levels, and pairing modes.
Guide to updating firmware through the soundcore app, including necessary precautions.
To Next Page
