To Next PageTo Next Page
Need help?Do you have a question about the Soundcore Life 2 NC and is the answer not in the manual?
General| Type | Over-ear |
|---|---|
| Connectivity | Wireless, Wired |
| Charging Time | Approximately 2 hours |
| Impedance | 16 ohms |
| Driver Size | 40 mm |
| Frequency Response | 16 Hz - 40 kHz |
| Bluetooth Version | Bluetooth 5.0 |
| Water Resistance | No |
| Noise Cancellation | Active Noise Cancellation |
| Battery Life | Up to 30 hours |
| Playtime | Up to 30 hours |
| Microphone | Built-in |
| Weight | 263 grams |
Press and hold the power button for specific durations to turn the device on or off, indicated by LED status.
Visual cues from the LED indicator show the device's power status, such as flashing blue when on or steady red when off.
Initiate Bluetooth pairing by pressing and holding the power button when the device is off.
Enable connection to multiple devices by quickly pressing the power button twice.
Manage music playback, volume, equalizer settings, and ANC modes using button presses.
Handle calls, put calls on hold, reject calls, and activate voice assistants via the headphones.
Connect and use the device with an audio cable, which automatically switches modes.
Receive audio alerts and visual cues when the battery is low.
Monitor the charging process through LED indicators showing charging or fully charged states.
Key technical details including input, charging time, playtime, driver size, and frequency response.
Understand the audio and visual indicators for low battery and charging status.
Ensure the Micro USB port is dry before charging and avoid turning on during charging.
Details on input, charging duration, playback time (with/without ANC), and driver specifications.
Press and hold the power button for over 3 seconds to turn the device on.
Press and hold the power button for 5 seconds to turn the device off.
Enter pairing mode when the device is off by pressing and holding the power button.
Activate multipoint pairing by double-pressing the power button.
Manage playback, volume, equalizer settings, and ANC modes via button presses.
Handle calls and media playback using the inline remote.
Manage calls and activate voice assistants through headphone controls.
Automatically switches to AUX mode when an audio cable is connected.
Understand alerts for low battery and charging status via audio tones and LED lights.
Ensure the Micro USB port is dry before charging and do not power on during charging.
Key specifications including input, charging time, playtime, driver, frequency response, and Bluetooth version.
Press and hold the power button for over 3 seconds to turn on the device.
Press and hold the power button for 5 seconds to turn off the device.
Enter pairing mode when the device is off by holding the power button for 5 seconds.
Activate multipoint pairing by double-pressing the power button.
Manage playback, track selection, volume, EQ, and ANC modes using button presses.
Handle calls and media playback using the inline remote.
Manage calls and activate voice assistants through headphone controls.
Automatically switches to AUX mode when an audio cable is connected.
Understand audio and visual alerts for low battery and charging status.
Ensure the Micro USB port is dry before charging and do not power on during charging.
Key specifications including input, charging time, playtime, driver, frequency response, and Bluetooth version.
Press and hold the power button for over 3 seconds to turn on the device.
Press and hold the power button for 5 seconds to turn off the device.
Enter pairing mode when the device is off by holding the power button for 5 seconds.
Activate multipoint pairing by double-pressing the power button.
Manage playback, track selection, volume, EQ, and ANC modes using button presses.
Handle calls and media playback using the inline remote.
Manage calls and activate voice assistants through headphone controls.
Automatically switches to AUX mode when an audio cable is connected.
Understand audio and visual alerts for low battery and charging status.
Ensure the Micro USB port is dry before charging and do not power on during charging.
Key specifications including input, charging time, playtime, driver, frequency response, and Bluetooth version.
Press and hold the power button for over 3 seconds to turn on the device.
Press and hold the power button for 5 seconds to turn off the device.
Enter pairing mode when the device is off by holding the power button for 5 seconds.
Activate multipoint pairing by double-pressing the power button.
Understand audio and visual alerts for low battery and charging status.
Ensure the Micro USB port is dry before charging and do not power on during charging.
Key specifications including input, charging time, playtime, driver, frequency response, and Bluetooth version.
Press and hold the power button for over 3 seconds to turn on the device.
Press and hold the power button for 5 seconds to turn off the device.
Enter pairing mode when the device is off by holding the power button for 5 seconds.
Activate multipoint pairing by double-pressing the power button.
Manage playback, track selection, volume, EQ, and ANC modes using button presses.
Handle calls and media playback using the inline remote.
Manage calls and activate voice assistants through headphone controls.
Automatically switches to AUX mode when an audio cable is connected.
Understand audio and visual alerts for low battery and charging status.
Ensure the Micro USB port is dry before charging and do not power on during charging.
Key specifications including input, charging time, playtime, driver, frequency response, and Bluetooth version.
Press and hold the power button for over 3 seconds to turn on the device.
Press and hold the power button for 5 seconds to turn off the device.
Enter pairing mode when the device is off by holding the power button for 5 seconds.
Activate multipoint pairing by double-pressing the power button.
Understand audio and visual alerts for low battery and charging status.
Ensure the Micro USB port is dry before charging and do not power on during charging.
Key specifications including input, charging time, playtime, driver, frequency response, and Bluetooth version.
Press and hold the power button for over 3 seconds to turn on the device.
Press and hold the power button for 5 seconds to turn off the device.
Enter pairing mode when the device is off by holding the power button for 5 seconds.
Activate multipoint pairing by double-pressing the power button.
Manage playback, track selection, volume, EQ, and ANC modes using button presses.
Handle calls and media playback using the inline remote.
Manage calls and activate voice assistants through headphone controls.
Automatically switches to AUX mode when an audio cable is connected.
Manage playback, track selection, volume, EQ, and ANC modes using button presses.
Handle calls and media playback using the inline remote.
Manage calls and activate voice assistants through headphone controls.
Automatically switches to AUX mode when an audio cable is connected.
Manage playback, track selection, volume, EQ, and ANC modes using button presses.
Handle calls and media playback using the inline remote.
Manage calls and activate voice assistants through headphone controls.
Automatically switches to AUX mode when an audio cable is connected.
