3 EN EN 4
Placement
Placing on a TV stand
Mounting on a Wall
1. Drill two holes (about 6mm diameter) on the wall. Insert the two
anchors into the drilled holes, then insert the two screws into the holes
and tighten.
750mm
2. Take care to leave 4mm between the screw heads and wall.
4mm
3. Hang your Soundcore Infini 2 on the wall.
Connecting
There are 3 ways to connect your Soundcore Infini 2 to a TV or other
devices.
Option 1: Connect to TV via Bluetooth
1. Press and hold the Bluetooth button for 2 seconds to enter Bluetooth
pairing mode.
2. Turn on the Bluetooth of your TV, select "Soundcore Infini 2" on the
Bluetooth list to connect.
>2s
Option 2: Connect to TV via HDMI Cable or Optical
Cable(Not Included)
To Next Page
Loading...
