Soundcore Infini 2 - Additional Connection Options and Operation; AUX and USB Connection; LED Light Guide; Remote Control Operation

5 EN EN 6
Option 3: Connect to Other Devices via AUX Cable or
USB Port
Using Your Soundcore Infini 2
Press to power on or switch to standby
Press to switch between optical, HDMI ARC,
Bluetooth, LINE IN, and USB mode in order
Press to enter Bluetooth pairing mode
Volume down
Volume up
The optical port cannot be used when a TV is connected to
the soundbar via HDMI port.
The soundbar will automatically switch to standby mode
when no audio input is received for 20 minutes.
The soundbar will wake up from the standby mode when
any button is pressed or source input is received.
LED Light Guide
Standby mode Solid red
LINE IN mode Solid green for 10s, then fades out
Bluetooth connected Solid blue for 10s, then fades out
Bluetooth pairing Slow blue blinking
Optical mode Solid yellow for 10s, then fades out
USB mode Solid cyan for 10s, then fades out
HDMI ARC mode Solid purple for 10s, then fades out
Remote Control
Insert the batteries into the remote control. Point the remote control
at the remote sensor on the front panel.
The remote control works within a distance of about 26 ft / 8 m
from the sensor and within an angle of about 30 degrees from the
left and right side.
T
T