Need help?Do you have a question about the Soundcore Life A2 NC and is the answer not in the manual?
Power| input voltage | 5 V |
|---|---|
| input current | 0.75 A |
| rated output power | 5 mW@1%THD |
Battery| earbuds battery capacity | 55 mA x 2 |
|---|---|
| charging case battery capacity | 750 mA |
| charging time | 2 hours |
Playback and Talk Time| playtime without ANC | up to 7 hours (total 35 hours with the charging case) |
|---|---|
| playtime with ANC | up to 6 hours (total 30 hours with the charging case) |
| playtime with transparency mode | up to 5 hours |
Audio Specifications| driver size | 11 mm |
|---|---|
| frequency response | 20 Hz-20 kHz |
| impedance | 16Ω |
Connectivity| bluetooth version | V 5.0 |
|---|---|
| bluetooth range | 10 m / 33 ft |
| waterproof level (earbuds) | IPX5 |
Enter pairing mode by opening the charging case and connect to 'Soundcore Life A2 NC'.
Press and hold the case button for 3 seconds to enter pairing mode for new devices.
Manage playback, calls, and sound modes using tap and hold gestures on the earbuds.
Control playback, calls, and activate voice assistants with single earbud operations.
Place earbuds in case, hold button for 10s until LEDs flash red then white for reset.
Successful reset indicated by one earbud flashing fast and the other breathing slowly.
Information on battery capacity, charging time, and total playtime with charging case.
To Next Page