03 EN
Soundcore
Life Dot 2
Soundcore
Life Dot 2
LED indicator (Earbuds)
Rapidly ashing white Bluetooth pairing
Steady white for 1 second Bluetooth connected
• When earbuds are out of the charging case and powered off, to manually enter
Bluetooth pairing mode, press and hold the multi-function button on both
earbuds for 3 seconds.
• Each time you power on your Soundcore earphones, it will automatically connect
to your last successfully connected device if available within the Bluetooth range.
Wearing
1. Choose the EarTips and EarWings that t your ears best.
2. Insert the earbuds into the inner canal of your ears.
3. Turn and nd the most comfortable position.
To Next Page
Loading...
