EasyManua.ls Logo

Soundcore P3 - Specifications

Soundcore P3
158 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
06 EN
2. Press and hold the button on the case for 10 seconds until the 3 LED indicators
flash white for 3 times and then flash white in sequence continuously. This
confirms that the reset was successful and your earbuds can be connected
normally.
1 2
R
L
R
L
10
s
×3
R
L
Specifications
Specifications are subject to change without notice.
Input 5 V 0.35 A
Battery capacity
63 mAh x 2 (earbuds); 800 mAh (charging
case)
Charging time 3 hours
Playtime (varies by volume level and
content)
Up to 10 hours (Total 50 hours with the
charging case)
Playtime (with ANC mode turned on)
Up to 9 hours (Total 40 hours with the
charging case)
Driver size 11 mm x 2
Frequency response 20 Hz - 20 kHz
Impedance 16 Ω
Waterproof level IPX5
Bluetooth version V 5.2
Bluetooth range 15 m / 49 ft

Related product manuals