Soundcore p30i - New Device

POWERING ON AND PAIRING
1
soundcore
P30i
2
3
POWERING ON & PAIRING
L R
1. Peel off the protective film on the earbuds.
2. Return the earbuds to the charging case and close the case. Then reopen the charging case.
3. Take out the earbuds. The earbuds will automatically power on and enter pairing mode. Select "soundcore
P30i" from your device's Bluetooth list.
* When taken out, the earbuds will automatically power off after 30 minutes if they are not connected.
The duration can be set in the soundcore app.
PAIRING WITH A NEW DEVICE
soundcore
NEW DEVICE
P30i
3s3s
To pair with a new device, press and hold the touch areas of both earbuds simultaneously for 3 seconds to enter
pairing mode.