Need help?Do you have a question about the SoundCraft MFX and is the answer not in the manual?
General| Phantom Power | +48V |
|---|---|
| Power Supply | Internal |
| FX Send | 1 |
| Stereo Returns | 2 |
| USB Interface | No |
| Headphone Output | 1 |
| Channels | 8 |
| Type | Analog Mixer |
| Mic Inputs | 8 |
Explains the meaning of warning, caution, and note symbols used in the manual.
Provides advice on using the mixer safely and creatively, emphasizing ear protection.
Details connection for microphone, line-level, and insert points.
Covers stereo inputs, mix outputs, aux/FX outputs, and headphone output.
Discusses signal polarity, phase, grounding, and shielding for optimal performance.
Details how to get support for products under warranty and out-of-warranty service.
Details microphone, line, and insert input stages for mono channels.
Explains high-pass filter, gain control, and equalizer functions.
Describes aux sends, FX send, pan control, and mix/sub routing.
Details the channel fader for level control and PFL for monitoring.
Details stereo input connections and the gain control for level adjustment.
Explains the equaliser and aux/FX send controls for stereo channels.
Covers balance control, mix/sub routing, and mute function.
Details the fader, PFL, peak LED, and signal present LED for stereo channels.
Details power indicator, 2-track inputs/level/routing, monitor source/level/outputs, and headphone level.
Covers mix/sub faders, routing (To Mix, Stereo/Mono), Mix/Mono/Sub outputs, Record outputs.
Details Aux Masters, Aux Outputs, and FX Master controls.
Explains meters, AFL/PFL LED, Footswitch input, Stereo Return inputs/level, and FX PFL.
Guides users through selecting programs and setting audio levels for effects.
Controls for setting tempo, storing presets, and selecting effect programs.
Adjusts key parameters like pre-delay, decay, and variation for effects.
Manages routing of FX signals to aux busses and the main mix.
Includes Clip LED, FX Mute switch, and Signal Present LED.
Describes Hall, Plate, Room, Chamber, and Gated reverb effects.
Describes Reverse, Ambience, Studio, Arena, and Spring reverb effects.
Explains controls like Pre Delay, Decay, Liveliness, and Diffusion.
Describes Studio, Digital, Tape, Pong, Modulated, and Reverse delay effects.
Details controls like Depth, Tempo Button, and Tap Ratio.
Describes Chorus, Flanger, Phaser, Tremolo/Pan, and Rotary effects.
Describes the Vibrato effect.
Discusses pickup patterns and optimal placement for microphones.
Guides users through connecting sources and setting initial control levels.
Provides detailed steps for setting input gain and channel levels for optimal performance.
Instructions for fitting the extender plate to the MFX8 model.
Provides physical measurements for the MFX8/2, MFX12/2, and MFX20/2 models.
Illustrates a typical setup for live sound reinforcement systems.
Demonstrates configurations for driving multiple speaker systems.
Shows setup for induction loops and foldback monitoring in places of worship.
Illustrates a setup for feeding multitrack recorders and creating stereo mixes.
Diagrams for balanced audio connections using XLR and 1/4" jacks.
Diagrams for unbalanced audio connections using 1/4" jacks.
Wiring diagrams for balanced 'Y' cables used for aux and mix outputs.
Wiring diagrams for unbalanced 'Y' cables.
Information on headphone splitters and load impedance.
To Next Page