Need help?Do you have a question about the SoundCraft MH3 and is the answer not in the manual?
General| Brand | SoundCraft |
|---|---|
| Model | MH3 |
| Category | Music Mixer |
| Language | English |
Advice on environmental conditions, cleaning, and proximity to radiation sources.
Guidelines for moving the console safely after installation.
Instructions on using correct power supplies and cables to avoid damage.
Best practices for a hum-free installation, including earthing and wiring.
Guidelines for creating a clean and noise-free earthing system for optimal performance.
Guidance on connecting screens to minimize unwanted signal coupling and avoid earth loops.
Details on XLR and 1/4" jack connectors for audio signals.
Information on the connector used for lighting.
Specifications for MIDI IN, THRU, and OUT ports.
Covers Pre-Amp, Insert, EQ, Aux Sends, Subgroup Routing, and Direct Output.
Covers Mix Bus Routing, LCR Panning, Fader, MUTE, SAFE/PREV LED, Metering, VCA, and SOLO.
Covers Rear Connector Panel and Solder Link Options.
Covers Input Stage, Insert Points, EQ, Aux Sends, Subgroup Routing, and Mix Bus Routing.
Covers Fader, MUTE, SAFE/PREV LED, Metering, VCA Assign LEDs, and SOLO.
Covers Rear Connector Panel and Solder Link Options.
Dual-purpose capability of controlling Group or Aux outputs with faders.
Details on 60mm faders for Group/Aux, insert points, and meters.
Stereo FX return input with a 3-band EQ.
Dedicated output section for Aux 9-12 with linear faders and insert points.
Details on the 12x4 Matrix section with rotary faders and receive knobs.
Pinouts for INSERT SEND/RETURN/EXT IN and AUX/MATRIX OUTPUTS.
Controls for Stereo Mix Left/Right and Centre output levels.
Additional stereo output, switchable pre/post MIX faders.
Features for talkback microphone input and test tone/pink noise generation.
Level controls for engineer's monitors and headphones.
128 Mute Scenes with MIDI control, insert, store, recall, and preview edit.
Functionality for managing 8 mute groups with editing capabilities.
Controls for AFL/PFL, SIP, Solo Clear, and input priority.
Protection mechanism for mutes against scene/group changes.
Allows preview and editing of Scenes and Mute Groups.
MIDI control for mutes and scenes, supporting BSS Varicurve and dbx DriveRack.
Linking two consoles for automation and solo logic via RS232.
User modes for recall, transmit changes, shortcuts, and resets.
Mode for assigning channels to VCAs and LEDs indicating assignments.
Allows setting mutes to SAFE mode, preventing unwanted changes.
Mode for checking and editing mute contents of scenes or groups.
Controls for selecting or changing User Modes.
Procedure for storing, editing, and testing Mute Groups.
Assigning Mute Masters as shortcut keys for scene recall.
Overview of scene automation features including display and switches.
Displays scene number, version, prompts, and error messages.
Switches for scrolling, recalling, storing, and inserting scenes.
Enables Mute Masters as shortcuts for scene recall.
Configures MIDI control for sequencers or samplers.
Enables VCA assignments to be recalled with scenes.
Disables mute updates when recalling scenes.
Disables MIDI program changes on scene recall.
Enables automatic sequential scene recall.
Controls whether scene recall updates mutes or not.
Controls MIDI program change transmission during scene recall.
Settings saved to EPROM and restored on power up.
Procedure for rebooting the CPU while the console is powered on.
Procedure to restore factory defaults, clearing all saved data.
Procedure for saving console data to a MIDI device.
Procedure for loading console data from a MIDI device.
Steps to fit the linking module for console connection.
Connecting main outputs for audio linking between consoles.
Linking VCAs, Mute Groups, and Solos via proprietary cable.
How console settings are synchronized after linking.
Behavior and limitations when consoles are linked.
How User Modes, Solo Modes, Mute Groups, VCA, Scenes, and Modes operate across linked consoles.
How MIDI dump functions locally for each console.
MIDI Mutes, Scene Program Changes, Dbx Driverack, BSS Varicurve implementation.
Frequency response of XLR inputs to outputs.
Total Harmonic Distortion and Noise measurements.
Measures of signal leakage between channels and buses.
Maximum and nominal operating levels for inputs and outputs.
Impedance values for inputs, headphone output, and other outputs.
Specifications for the mono input high-pass filter.
Specifications for the mono input equalizer bands and Q.
Details on LED bargraphs and optional VU Meterpod.
Power requirements for different console configurations.
Weight specifications for various console channel counts.
Recommended temperature range and humidity levels.
To Next Page