Need help?Do you have a question about the SoundCraft Notepad 124 and is the answer not in the manual?
General| Brand | SoundCraft |
|---|---|
| Model | Notepad 124 |
| Category | Music Mixer |
| Language | English |
Information regarding the equipment's compliance with EMC and LVD directives.
Connecting microphones via XLR or unbalanced sources.
Connecting line-level sources like keyboards and drum machines.
Connecting stereo sources via 1/4" jacks.
1/4" TRS outputs carrying the main stereo mix signal.
3-pole 1/4" outputs for sending signals to monitors or effects.
3-pole 1/4" outputs for feeding monitoring systems.
1/4" stereo output for connecting headphones.
Information for customers regarding warranty service.
Contact details for servicing equipment outside warranty.
Description of the XLR microphone input and its features.
Description of the 1/4" line input and its capabilities.
Control for adjusting the input signal level.
Controls for adjusting high, mid, and low frequencies.
HPF switch to reduce low-frequency rumble and pops.
Control for setting the Aux send level on mono channels.
Control for setting the FX send level on mono channels.
Control for positioning the signal in the stereo field.
Fader to control the overall level of the input channel.
Indicator showing signal clipping on the channel.
Connecting stereo sources via 1/4" jacks or RCA connectors.
Control for the Aux/FX send level on stereo channels.
Adjusts input sensitivity for consumer or professional sources.
Control for balancing stereo signal within the mix.
Fader for controlling the stereo input channel level.
LED indicating when the console is powered on.
Enables +48V power for condenser microphones.
RCA inputs for connecting playback devices.
Routes 2-Track input signals to the main mix outputs.
Routes 2-Track input signals to the monitor outputs.
Controls the output level for monitors and headphones.
1/4" impedance-balanced outputs for monitoring.
1/4" stereo jack for connecting headphones.
Bar graph meters showing signal levels for monitoring.
RCA outputs providing a copy of the main mix signals.
1/4" output for Aux or FX bus signals.
Main fader controlling the overall mix output level.
1/4" jack sockets for the main stereo mix outputs.
Controls the FX signal level sent to the main mix.
2-digit display showing the current effect program number.
LEDs indicating signal presence and potential clipping.
Control for selecting and applying effect programs.
Adjusts the level of the FX signal sent to the main mix.
Routes the FX signal to the monitoring outputs.
Explanation of reverberation effects and their types.
Description of the Room Reverb effect simulation.
Description of the Hall Reverb effect emulating concert acoustics.
Description of the Plate Reverb effect simulating metal plates.
Description of the Reverse Reverb effect.
Description of the Gated Reverb effect.
Explanation of delay effects and their parameters.
Explanation of Chorus, Flanger, Phaser, and Tremolo effects.
Guidance on choosing and positioning microphones for optimal sound.
Step-by-step guide for initial control settings and connections.
Illustrates a typical setup for live sound reinforcement using the Notepad 124.
To Next Page