Need help?Do you have a question about the SoundCraft EFX12 and is the answer not in the manual?
General| Channels | 12 |
|---|---|
| Mic Inputs | 8 |
| Stereo Inputs | 2 |
| Inputs - Mic Preamps | 8 |
| Aux Sends | 2 |
| Effects | Yes |
| USB Interface | No |
| Inputs - Other | 2 x RCA |
| Outputs - Other | RCA, 1/4" jack |
| EQ Bands | 3-band with swept mid |
| Effects Detail | Lexicon Effects |
| Phantom Power | Yes |
| Dimensions | 432mm x 91mm x 362mm (17" x 3.6" x 14.3") |
| Weight | 5.8 kg |
Explains the lightning flash symbol for dangerous voltage.
Explains the exclamation point symbol for important operating instructions.
Explains the note symbol for important operation tips.
Provides tips on headphone outputs and monitoring levels.
Offers guidance on handling audio and experimenting with controls safely.
Provides a quick start guide to operating the mixer's features.
Details on connecting microphones using XLR connectors, including balanced and unbalanced types.
Explains how to connect line-level sources using 1/4" jack inputs.
Describes the function and connection of the pre-EQ insert point.
Details on connecting stereo sources like keyboards and drum machines.
Explains the balanced XLR outputs for connecting to amplifiers.
Information on the stereo headphone jack and recommended impedance.
Describes the balanced jack outputs for auxiliary and effects signals.
Explains signal polarity and phase relationships for audio connections.
Provides best practices for connecting unbalanced audio signals to minimize noise.
Offers advice on diagnosing and resolving common mixer issues.
Information for customers with products still under warranty.
Contact details for servicing equipment outside the warranty period.
Step-by-step guide on selecting, loading, and setting audio levels for effects.
Explains the chorus effect and its controls for fattening tracks.
Details the flanger effect, creating swishing and tunneling sounds.
Describes the phaser effect, using LFO for oscillating comb-filter sounds.
Explains tremolo for amplitude changes and panner for stereo effects.
Details the rotary effect simulating spinning speakers for vibrato/choir sound.
Guidance on selecting and positioning microphones for optimal sound.
Steps for connecting the system and setting initial control positions.
A typical setup for live sound reinforcement using the mixer.
Configuration for driving multiple speaker setups.
A configuration for places of worship, including induction loops.
A setup for recording with multitrack recorders and monitoring.
Diagrams for balanced line inputs, outputs, and auxiliary signals.
Diagrams for unbalanced outputs and stereo return inputs.
Wiring diagrams for mono insert cables.
Diagrams for balanced and unbalanced Y-cables used for splitting signals.
Information on using a headphone separator to connect multiple headphones.
To Next Page