Need help?Do you have a question about the SoundCraft EFX8 and is the answer not in the manual?
General| Type | Analog |
|---|---|
| Channels | 8 |
| Line Inputs | 8 |
| Phantom Power | Yes |
| Faders | 60mm |
| Inputs - Other | 2 x Stereo |
| Outputs - Main | 2 x XLR |
| EQ Bands | 3-band |
| Aux Sends | 1 |
| Effects | Lexicon Effects Engine |
| Dimensions | 330mm x 362mm x 91mm (13" x 14.3" x 3.6") |
| Mic Inputs | 8 |
| Weight | 4.6kg (10.1 lbs) |
Explains the meaning of safety symbols like lightning flash and exclamation point.
Offers guidance on safe audio practices and creative experimentation with the mixer.
A brief guide to quickly familiarize users with the mixer's features and controls.
Details on connecting audio sources and outputting signals to amplifiers and recording devices.
Information on product warranty, dealer contact, and out-of-warranty service procedures.
Detailed explanation of controls for gain, EQ, auxiliary sends, pan, mute, and fader for mono channels.
Covers stereo inputs, gain, EQ, balance, auxiliary sends, and fader controls for stereo channels.
Describes phantom power, meters, master faders, and output level controls for the main mix.
Guide on selecting, loading, and setting audio levels for the built-in effects processor.
Descriptions of different reverb algorithms like Hall, Plate, Room, Chamber, and Gated reverb.
Explains controls for Pre Delay, Decay, Liveliness, and Diffusion for reverb effects.
Introduces various delay effects including Studio, Digital, Tape, Pong, Modulated, and Reverse delays.
Details on time range, feedback, ducking, smear, and tap ratio for delay effects.
Covers effects like Chorus, Flanger, Phaser, Tremolo, Rotary, and Vibrato with their respective controls.
Step-by-step guide for setting up input channels, gain staging, and basic mixing levels.
Illustrates common setup configurations for live sound, multi-speaker systems, places of worship, and recording.
To Next Page