Need help?Do you have a question about the SoundCraft FX16II and is the answer not in the manual?
General| Channels | 16 |
|---|---|
| Mic Inputs | 16 |
| Aux Sends | 4 |
| EQ Bands | 3-band with swept mid |
| Built-in Effects | Yes |
| Phantom Power | Yes |
| Type | Analog Mixer |
| Inputs - Other | 2-track RCA |
| Faders | 60mm |
| Outputs - Main | XLR |
| Outputs - Other | Headphone |
| Inputs - Mic Preamps | 16 x XLR |
| Effects | Lexicon processor |
Provides advice on hearing protection and safe experimentation with audio settings.
Explains the XLR and 1/4" jack inputs, including Mic, Line, and Inserts.
Describes the RCA phono plug connection for 2-Track returns.
Details Mix, Aux, Monitor, Direct, and Headphone output connections.
Covers polarity, grounding, and shielding for optimal audio.
Covers Mic, Line inputs, Phantom Power, Gain, Filters, EQ.
Details Aux Sends, FX, Pan, Mute, Mix/Sub routing, Solo/Peak monitoring, Fader.
Covers Direct Output, PRE-FADE, and Insert point functionality.
Covers Aux, FX, Sub, Mix masters, Returns, Inserts, 2 Track, Solo Modes, Monitoring.
How to select, load, and adjust basic FX parameters.
Details various reverb, delay, and modulated effect types and their parameters.
Information on Factory Reset for the effects processor.
Guides through initial setup and operation.
Illustrates various use cases like live sound, recording, and broadcasting.
Provides a markup sheet for settings and typical connecting lead diagrams.
Details rackmounting, dimensions, technical specs, and warranty.
To Next Page