To Next PageTo Next Page
Need help?Do you have a question about the SoundCraft Spirit F1 and is the answer not in the manual?
General| Type | Analog Mixer |
|---|---|
| Aux Sends | 2 |
| Faders | 60mm |
| Power Supply | External |
| EQ | 3-band EQ |
| Phantom Power | +48V |
| Returns | 2 |
| Headphone Output | 1 (1/4" TRS) |
| Main Outputs | 2 (XLR balanced), 2 (1/4" TRS balanced) |
General safety warnings and precautions for using the mixer.
Important safety notes to avoid bodily injury.
Crucial warnings to prevent damage to the equipment.
Details the terms and conditions of the product warranty.
General overview of the mixer's functions and layout.
Illustrates various audio connections for microphones, instruments, and outputs.
Details on using the mono input channels, including mic and line inputs.
Explanation of the insert point for signal processing units.
Guide to setting the input signal sensitivity for optimal levels.
Engages a filter to reduce low-frequency rumble and mic pops.
Provides frequency adjustment for HF, MID (swept), and LF bands.
Controls for routing signals to external effects or monitors.
Adjusts the stereo balance of a channel's signal.
Controls whether a channel's output is active or muted.
Adjusts the overall signal level for a specific channel strip.
Enables pre-fader listening to individual input signals via headphones.
Details on using stereo inputs, including unbalanced RCA and balanced TRS jacks.
Provides 48V phantom power to condenser microphones.
Shows when the console is powered on.
Visual level indicators for monitoring signal peaks and overall output.
Combines left and right stereo signals into a mono output.
Controls output level for monitors and headphones.
Selects 2TK input as monitor source instead of MIX.
Sets the playback level for the 2 Track Tape input.
Adds the 2TK signal to the stereo Mix for playback or effects return.
Controls master output level for each auxiliary send.
Allows monitoring of individual auxiliary output signals.
Switches Aux 2 sends between pre-fade and post-fade modes.
Sets the final output level for the stereo Mix outputs.
Steps for setting initial control positions and levels for the mixer.
Common issues and solutions, including power and microphone problems.
Illustrates typical setups for live sound reinforcement.
Diagrams for multitrack recording and playback setups.
Setup diagram for DJ monitoring and sound systems.
Diagram for a typical sound setup in a place of worship.
Diagram showing microphone setup for conferences with graphic EQ.
Diagram illustrating audio setup for video editing and narration.
Diagram for connecting two Folio F1 mixers in master/slave configuration.
Block diagram illustrating the signal flow for mono inputs.
Block diagram illustrating the signal flow for stereo inputs.
Illustrates various audio connectors like XLR, TRS, and RCA.
Diagrams showing the process of rack mounting the mixer.
Technical specifications regarding noise levels.
Technical specifications for crosstalk performance.
Technical specifications for frequency response.
Technical specifications for Total Harmonic Distortion plus Noise.
Technical specifications for input and output impedances.
Technical specifications for maximum input and output signal levels.
Technical specifications for the product's weight.
Diagram showing the layout and labels of channel strip controls.
