SoundCraft Si Series Quick Start Guide

Page 7Soundcraft® Si Series Quick Start Guide Issue 1010
ADJUSTING THE GAIN AND PAN OF THE INPUT SIGNAL
Connect an audio source to Mic/Line Input A1.
Press the GAIN button in the Left hand section.
You can now adjust the GAIN control (encoder) just as you would on an analogue
console and monitor the amount of input level on the Input Level Meter in the
associated OLED display.
If the input level is too high the CLIP arrow symbol will appear next to the
Input Meter. If this happens back off the input gain a little until it extinguishes.

SoundCraft Si Series Specifications

General

Model Variants	Si Expression, Si Performer, Si Compact, Si Impact
Built-in Effects	Lexicon effects engine
Type	Digital mixer
EQ Bands	4-band EQ per channel
Subgroups	4 subgroups
Effects Engines	Lexicon effects engine
Faders	Motorized faders
Display	Varies by model
Dimensions	Varies by model
Weight	Varies by model