SoundCraft Si Series Quick Start Guide

Page 8 Soundcraft® Si Series Quick Start Guide Issue 1010
The following functions are available for selection via dedicated buttons:
• GAIN
• FILTERS/DELAY
• GATE
• COMPRESSOR
• EQ
• PAN
• BUS 1-8
• BUS 9-16
• BUS 17-24
In the example below the GAINS button has been selected and therefore the
encoders are adjusting the input gains for the associated channels.
ADJUSTING THE PAN POSITION OF THE CHANNEL
Press the PAN button in the GLOBAL MODE area. This will cause the row of
encoders to function as PAN controls for their associated input channels
You may now adjust the PAN position by rotating the encoder. The top section of
the OLED display will conrm the actual numeric value for the chosen position.
Now experiment with other GLOBAL functions. Note that for functions with more
than 1 parameter, the SCROLL keys illuminate, allowing you to control those
parameters.

SoundCraft Si Series Specifications

General

Model Variants	Si Expression, Si Performer, Si Compact, Si Impact
Built-in Effects	Lexicon effects engine
Type	Digital mixer
EQ Bands	4-band EQ per channel
Subgroups	4 subgroups
Effects Engines	Lexicon effects engine
Faders	Motorized faders
Display	Varies by model
Dimensions	Varies by model
Weight	Varies by model