EasyManuals Logo

SoundCraft Si Series Quick Start Guide

SoundCraft Si Series
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Page 9Soundcraft® Si Series Quick Start Guide Issue 1010
DO YOU NEED 48V PHANTOM POWER?
Press and hold the 48V button in the CHANNEL MODE section (this will put the
control surface into INTERROGATE mode – see below for further details) and then
press the SEL button above the channel (or channels) that you want to turn that
function on for. You will see that the SEL buttons will illuminate ORANGE and the
48V icon will appear in the OLED display for the
relevant channels.
INTERROGATE MODE
This mode is very useful for making multiple switch assignments for the input
channels just as you would on an analogue console. For example, on an analogue
console you might want to switch 48V power on for several channels, or you might
want to switch on the EQ IN buttons for a number of channels and this would be
achieved using dedicated switches on each input channel strip. On the Si Series
the INTERROGATE mode allows you to do the same thing.
Press and hold the button you want to switch on for a number of channels (for
example 48V), and then press the SEL buttons on the relevant channels. The OLED
display will conrm the selections you have made.
INTERROGATE mode is only relevant for the currently displayed input fader bank
and you cannot switch between banks while making selections. This mode is also
useful for checking assignments for input channels. By pressing the relevant but-
ton (e.g. EQ IN) the SEL buttons will illuminate for any input channel that has that
button assigned to it allowing you to see at a glance what assignments have been
made. Any of the buttons in the CHANNEL MODE area can be used to
INTERROGATE the control surface.
Note! When you are using Interrogate mode you can also press the
CLEAR button to clear any current selections. This should be used
carefully though!

Other manuals for SoundCraft Si Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SoundCraft Si Series and is the answer not in the manual?

SoundCraft Si Series Specifications

General IconGeneral
Model VariantsSi Expression, Si Performer, Si Compact, Si Impact
Built-in EffectsLexicon effects engine
TypeDigital mixer
EQ Bands4-band EQ per channel
Subgroups4 subgroups
Effects EnginesLexicon effects engine
FadersMotorized faders
DisplayVaries by model
DimensionsVaries by model
WeightVaries by model

Related product manuals