Soundigital 800.4 EVO6 - User Manual

OWNER´S MANUAL
800.4

Summary

Safety Instructions

Installation Sequence

Pre-Installation Safety

Mandatory step to disconnect the battery negative terminal before starting the installation.

Power and Ground Cable Installation

Proper routing and connection of power and ground cables, including fuse placement and distance.

Signal, Output, and Remote Connections

Electrical Dimensioning and Audio Inputs

Electrical Dimensioning Guidelines

Specifies minimum cable sections for power, ground, and speaker connections based on amplifier power.

Crossover Setup

Crossover Switch Settings Explained

Explains the 'F' (Full Range), 'HP' (High Pass), and 'LP' (Low Pass) settings for frequency filtering.

Gain Setting

Gain Setting Procedure

Detailed steps and equipment needed for correctly setting the amplifier's gain using a voltmeter.

Battery Connection Diagram

Optimal Battery Bank Wiring

Technical Specifications

Amplifier Parameters

Lists detailed technical specifications of the amplifier, including power, frequency response, and voltage.

Soundigital 800.4 EVO6 Specifications