Need help?Do you have a question about the Soundigital EVOX2 1200.4 and is the answer not in the manual?
Covers installation, safe operation, environmental considerations, and personal protective equipment.
Emphasizes unplugging the battery, safe cable routing through walls, and proper fuse/breaker installation.
Details connecting positive and negative power cables, observing polarity, and ensuring short ground cable.
Instructions for verifying connections, reconnecting the battery, and powering on the system.
Warns against using RCA and High Level inputs simultaneously to prevent amplifier damage.
Illustrates how to connect speakers and power for a 4-channel setup.
Illustrates how to connect speakers and power for a 3-channel setup (bridged).
Illustrates how to connect speakers and power for a 2-channel setup (bridged).
Step-by-step guide to setting the amplifier's gain using a voltmeter and test tone.
Provides target output voltages for stereo and bridge modes for specific models.
Recommends connecting multiple batteries to busbars for optimal energy performance and even current distribution.
General| Channels | 4 |
|---|---|
| Maximum consumption at Musical Signal (12.6V) | 60A |
| Maximum consumption at Sine Signal (12.6V) | 120A |
| Damping Factor | > 200 |
| Input Sensitivity | 0.2V - 4V |
| Input Impedance | 22k Ohms |
| Minimum Output Impedance (Stereo) | 2 Ohms |
| Minimum Output Impedance (Bridge) | 4 Ohms |
| Power @ 12.6V @ 4 OHMS (Bridged) | 600W x 2 |
| Supply Voltage | 16V |
| Frequency Response | 10Hz |
| Crossover HPF | 50Hz |
| Crossover LPF | 45Hz - 850Hz |
| Total Harmonic Distortion | 0.05% |
To Next Page