Soundigital EVOPS 800.4 - User Manual

Lists key features like resistance to moisture, compact design, and IP64 rating.

Details items included with the amplifier: EVOPS Amplifier, quick guide, wrench, and stickers.

Provides essential safety guidelines for installation, operation, and handling to prevent injury and equipment damage.

Explains the DTM system for efficient thermal exchange between components and heatsink.

Highlights the intelligent PCB layout, component usage, and resulting compact, robust design.

Details the robust assembly designed to withstand high vibrations, bumps, and impacts.

Step-by-step instructions for removing the flexible plastic seals from the amplifier connectors.

Instructions for correctly fitting the flexible plastic seals onto the amplifier connectors.

Details the variable gain and crossover controls for different amplifier channels.

Identifies audio input (RCA) and output connectors for each amplifier channel.

Describes power supply connectors (+12VDC, GND, REM) and speaker output terminals.

Provides minimum cable section requirements for GND, +12VDC, and speaker outputs based on amplifier power.

Outlines the sequential steps for amplifier installation, including critical safety warnings before proceeding.

Illustrates the wiring connections for a 4-channel amplifier setup.

Shows the wiring connections for a 3-channel amplifier setup.

Presents the wiring diagram for a 2-channel amplifier configuration.

Details the steps and equipment needed to properly set the amplifier's gain.

Explains the 'F' (Full Range), 'HP' (High Pass), and 'LP' (Low Pass) crossover functions and how to set them.

Lists detailed specifications including power output, frequency response, impedance, and voltage.

Provides physical dimensions of the amplifier in millimeters and inches.