SoundLogic XT RAINBOW - Listening to Music Wirelessly; Troubleshooting

5
Redial last number
Standby mode
and connected
to a device
Short press the Phone button twice
Listening to Music Wirelessly
Please ensure that your device (iPhone, Tablet or Other Smart Phone) is paired with the Bluetooth
Speaker to stream music wirelessly. Once it is paired, play music from your device.
Function
Operation
Button
Increase /
Decrease Volume
Playing music
Long push the Volume + to left will increase the volume or long
push the Volume - to right will decrease the volume
Pause
Playing music
Short press the play/pause button once will pause the music
Play
Pause
Short press the play/pause button once will resume the music
Skip Forward /
Skip Backward
Playing music
Short push the Next track button to left will skip forward the
track. Short push the Previous track button to right will skip
backward the track.
(Note: An indication tone will alert you when the volume is adjusted to the maximum or minimum level.)
Play music through “Auxiliary” mode
▪ Turn ON the speaker.
▪ Insert one end of the Auxiliary cable (included) into the Auxiliary port, and the other end to the
audio device (such as phone / MP3 Player / computer / tablet / …..etc.).
▪ Select your favourite song at the source device to play.
▪ Long push the Volume + to left will increase the volume or long push the Volume - to right will
decrease the volume.
Note: Play, Pause, Skip Forward, Skip Backward etc can only be controlled through the source devices,
while playing music in Auxiliary mode.
Do’s and Don’ts
Do not play music at excessive levels. Damage to hearing and/or equipment may result.
Do not use outdoors in excessive rain or extreme weather conditions.
Tips!!
When the speaker is not in use, turn it OFF in order to save the battery power.
Troubleshooting
Problem
Possible Cause
Solution
Low sound level
Source (Tablet, Mobile Phone, Laptop,
etc.) volume too low.
Battery dead
Adjust source volume
Charge Battery