Need help?Do you have a question about the SOUNDMASTER ELiTEline UR8200 and is the answer not in the manual?
Tuner Specifications| Tuner Range (FM) | 87.5 – 108 MHz |
|---|---|
| Number of preset radio stations (FM) | 10 |
| Number of preset radio stations (DAB) | 10 |
Power| AC power adaptor input voltage | AC 100-240 V |
|---|---|
| AC power adaptor frequency | 50/60Hz |
| AC power adaptor output voltage | DC 5 V |
| AC power adaptor output current | 1.5A |
General safety, environmental, and setup instructions for the device.
Identifies and describes the buttons and features on the device's control panel.
Describes the various icons and information shown on the device's display.
Instructions on connecting the device to power and using the antenna.
Guide to setting the device's clock and adjusting the volume.
Steps to switch the radio to Digital Audio Broadcasting mode.
How to search for, tune, and store DAB radio stations as presets.
How to view detailed information broadcast with DAB stations.
Navigating and utilizing the various options within the DAB menu system.
Details on Full Scan, Manual Tuning, DRC, Prune, and System settings.
Steps to select FM mode and perform automatic station searches.
Instructions for tuning to stations and saving them as presets.
Viewing additional data transmitted by FM stations via RDS.
Navigating and utilizing the various options within the FM menu system.
Details on performing local or DX scans for FM stations.
Step-by-step guide to configure alarm settings, source, and volume.
How to turn specific alarms on or off from standby mode.
Using the snooze feature and setting the automatic sleep timer.
Instructions for projecting the time onto a wall and adjusting the image.
Options for updating time, date, and format settings.
Configuring automatic time and date updates from various signal sources.
Selecting between 12-hour and 24-hour time display formats.
Choosing the preferred format for displaying the date.
Adjusting backlight timeout duration and brightness levels.
Configuring the duration before the radio switches to inactive standby automatically.
Performing a factory reset and viewing the software version.
How to use the USB port to charge external electronic devices.
Troubleshooting steps and guidelines for care, maintenance, and storage.
To Next Page
