MCD1700 / English instruction manual
ENG 4
HINTS FOR BEST RECEPTION:-
- AM : THE RECEIVER HAS A BUILD-IN AM BAR ANTENNA. IF AM RECEPTION IS WEAK, SLIGHT ROTATE
OR RE-POSITIONING OF THE UNIT WILL USUALLY IMPROVE THE AM RECEPTION.
- FM : THE RECEIVER HAS A BUILD-IN FM WIRE ANTENNA (28) HANGING AT THE REAR CABINET. THIS
WIRE SHOULD BE TOTALLY UNRAVELED AND EXTENDED FOR THE BEST RECEPTION.
PLAYING COMPACT DISC
-
GETTING START
1. PRESS FUNCTION BUTTON (19) TO SELECT “ CD ” MODE.
2. PRESS “CD DOOR OPEN/CLOSE” BUTTON (4) TO OPEN THE CD DOOR (8).
3. PLACE A CD WITH THE PRINTED SIDE FACING UP INSIDE THE TRAY & THEN CLOSE THE CO DOOR.
4. FOCUS SEARCH IS PERFORMING, THE LCD DISPLAY (21) WILL SHOW THE TOTAL NUMBER OF TRACKS
& TOTAL PLAYING TIME.
PLAY / PAUSE MODE
1. PRESS THE “BAND/ ” BUTTON (15) TO START PLAYBACK, THE FIRST TRACK WILL START PLAYBACK.
2. TO INTERRUPT, PRESS THE “BAND/ ” BUTTON (15) ONCE, AND THE PLAYING TIME WILL BE FREEZE &
FLASING ON THE LCD DISPLAY (21). PRESS AGAIN TO RESUME NORMAL PLAYBACK.
STOP MODE
1. IF “ STOP ” BUTTON (14) IS PRESSED DURING PLAY OR PAUSE MODE, SYSTEM WILL GO TO STOP
MODE.
SKIP MODE (SKIP UP
/ SKIP DOWN )
1. DURING PLAY OR PAUSE MODE, IF “SKIP UP ” BUTTON (2) IS PRESSED. IT WILL GO TO NEXT TRACK
AND DISPLAY THE TRACK NO. AND THEN REMAIN THE PLAY OR PAUSE MODE.
2. DURING PLAY OR PAUSE MODE, IF “SKIP DOWN ” BUTTON (2) IS PRESSED. IT WILL GO BACK TO THE
BEGINNING OF THE TRACK, ORIGINAL TRACK NO. IS DISPLAY AND REMAIN THE PLAY OR PAUSE MODE.
3. AFTER STEP 2, PRESS “SKIP DOWN ” BUTTON (2) AGAIN WILL GO TO THE PREVIOUS TRACK AND
REMAIN THE PLAY OR PAUSE MODE.
FOR MP3 DISC
1. AFTER FOCUS SEARCH IS PERFORMING, THE TOTAL NUMBER OF TRACK AND ABLUM WILL BE SHOWN
ON THE LCD DISPLAY (21).
2. PRESS “ FOLDER/ PRE-UP “ (16) TO SELECT THE ALBUM NUMBER.
3. PRESS “ SKIP UP “ OR “ SKIP DOWN “ BUTTON (2) TO SELECT THE TRACK NUMBER.
4. WHEN THE DESIRED TRACK AND ALBUM IS BEING SELECTED, PRESS THE “ BAND/
” BUTTON (15) TO
START PLAYBACK.
ID3 (TRACK/ALBUM TITLE) FUNCTION (BY REMOTE HANDSET)
PRESS THE “ INFO “ BUTTON UNTIL THE LCD DISPLAY (21) SHOW “ FILE - … ”DURING PLAYBACK OF MP3
FILE, THE SONG TITLE / ARTIST NAME / ALBUM NAME IS BEING DISPLAYED IN SEQUENCE . PRESS THE
“ INFO ” BUTTON AGAIN TO DISABLE THE FUNCTION.
REMARK:-
- IN THAT CASE OF NO NAME HAD BEEN ASSIGNED FOR THE TRACK, “ NO TITLE “ OR “ NO ARTIST “ IS BEING
DISPLAYED” ON LCD DISPLAY (21).
- NO TITLE/ALBUM NAME CAN BE RECOGNIZED IF THE INPUT FORMAT ON THE DISC/MASS MEDIA IS NOT
SUPPORTING BY THE SYSTEM.
- THE SYSTEM SUPPORT ONLY ENGLISH AND NUMERAL FOR ID3 FUNCTION
To Next Page
Loading...
