Repeat one: To repeat the current track during play mode.
Repeat folder: To repeat the tracks in the current folder.
Repeat all: To repeat all the tracks.
Random play: In this mode the CD player will play tracks in a random order.
Intro play: In this mode the CD player will play first 10 seconds of each track on the CD, then
stop playing.
CARE AND MAINTENANCE
Cleaning CDs
Use a soft cloth to remove fingerprints and dust from the disc surface.
Wipe in a straight line from the centre to the outside of the disc.
Never use chemicals such as record sprays, anti-static sprays,
benzine or thinners to clean your CDs.
To reduce the risk of scratches, always put CDs back in their cases after use.
Do not expose CDs to direct sunlight, high humidity or high temperatures for long periods.
Do not stick paper or write on either side of the CD.
IV. TECHNICAL PARAMETERS
CD/ Radio System
Mains supply........................................................................................ 100V- 240V AC ~50/60Hz
FM Tuner frequency range................................................................................. 87.5 to 108MHz
CD Formats ....................................................................................................... CD, CD-R, MP3
Front socket.................................................................................................................... USB2.0
CD frequency response........................................................................................ 20Hz to 20kHz
Amplifier frequency response............................................................................... 20Hz to 20kHz
Amplifier output power....................................................................................................... 2x2 W
Speaker impedance ......................................................................................................... 6 ohms
Main unit size .........................................................…...................... 192(W)×140(D)×142(H)mm
Note: we has a policy of continuous product development and reserves the right to change
specification without prior notice
8
7