SoundPeats Capsule3 Pro - User Manual

1
English
First Start
1. Please open the charging case, take out the two earbuds, and tear o the
insulating lm on the earbuds charging contacts, then put the earbuds back
into the charging case and keep the lid open. Long press the button on the
charging case for 3 seconds at the same time until the LED indicator on
charging case blinking with white light, which indicates that the earbuds
have entered pairing mode.
2. Turn on the bluetooth of your device, and please choose“SOUNDPEATS
Capsule3 Pro”in the list to pair, then the earbuds will connect with your
device.
SOUNDPEATS Capsule3 Pro
Connected

Summary

First Start

Reset Procedure

Product Diagram and Features

Wearing and Fit Guide

Touch Controls

Frequently Asked Questions (Q&A)

Charging Case LED Indicators

Explains the meaning of LED lights on the charging case for power and charging status.

Frequently Asked Questions (Q&A)

Charging the Charging Case

Instructions for charging the case using a Type-C adapter and recommended frequency.

Earphones Remain Connected

Troubleshoots why earphones stay connected to the phone even when closed in the case.

Regulatory Compliance

FCC and IC ID Information

Details FCC statement and Industry Canada ID compliance conditions for the device.

SoundPeats Capsule3 Pro Specifications

General

Driver Type	Dynamic
Driver Size	12mm
Bluetooth Version	5.3
Noise Cancellation	Hybrid ANC
Battery Life	8 hours (earbuds), 52 hours (with case)
Charging Port	USB-C
Water Resistance	IPX4
Charging Time	1.5 hours (earbuds), 2 hours (case)
Weight (per earbud)	5.5g
Transparency Mode	Yes
Touch Controls	Yes
Microphone	Yes
Wireless Charging	No
Audio Codec	SBC