SOUNDPEATS
BLUETOOTH
How to pair SoundPEATS Mini Pro?
1. Open the charging case lid and take out both earbuds, then remove the
insulating film and put them back.
2. The earbuds automatically pair to each other after being taken out from the
charging case. LED indicator on main earbuds flashes in red and white, the
second earbud stays in white.
3. Activate Bluetooth on the device, and choose"SOUNDPEATS Mini Pro" on
Bluetooth list to pair.
How to reset SoundPEATS Mini Pro?
(Try the following steps if you fail building connection between two earbuds, or
between earbuds and device.)
1. Clear the pairing record from all your devices.
2. Place back both earbuds into charging case and make sure they are in
charging status.(Red lights are keeping on.)
3. Press and hold both buttons for 10s until both LEDs flash in red and while
twice, reset complete.
Why does the sound of the earbuds cut or noise occur?
When using the earbuds close to personal computers,
Wi-Fi routers, microwave ovens, refrigerators, etc.
Refrigerators, microwave ovens, Wi-Fi routers, personal
computers, etc. are devices that emit radio waves.
The earbuds may be affected by these radio waves when
using them in a location with a mixture of multiple radio
waves.
Please use the earbuds away
from Wi-Fi routers, personal
computers, microwave
ovens, refrigerators, etc. in
order to avoid radio wave
interference.
To Next Page
Loading...
