Need help?Do you have a question about the Soundstream Reference 500sx and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| RMS Power at 4 Ohms | 125W x 2 |
| RMS Power at 2 Ohms | 250W x 2 |
| Bridged RMS Power at 4 Ohms | 500W x 1 |
| Frequency Response | 10Hz - 30kHz |
| Signal to Noise Ratio | >100dB |
| Crossover Type | Variable electronic |
| Bass Boost Frequency | 45Hz |
| Bass Boost | 0 to +18dB |
Circuit that automatically customizes amplifier for application, optimizing performance with low impedance loads.
Advanced output section design using multiple transistors for faster, cooler, efficient operation.
Prevents amplifier shutdown due to heat by gradually reducing power, then returning it when cooled.
Significantly increased drive current for maintaining performance into low impedance loads.
To Next Page