screen
Three screen ratio modes are
available, Normai/PS
(4:3 Pan Scan),
Normai/LB (4:3 Letter Box)
and Wide (16:9). Different disc formats
will display different images depending this setting and
the
screen size used.
[8]
NTSC/
PAL:
Select
this menu item to set up your preferred video output format. PAL is commonly used
in
Europe.
NTSC
is
commonly used
in
the
USA
and Japan. Auto is commonly used.
[9]
DEFAULT:
Factory reset.
Set all values
to Factory
default values
including
memory and preset stations.
SYSTEM INFORMATION
Press
SYSTEM
button to show the information
of
the
system.
You
can view
detail
system information
including serial number
of
the software.
CAL/
BRAT/ON
The calibration
of
the screen
is
useful
when some
malfunction occur with the touch screen and it needs
adjustment.
CALl
BRA
TION
procedure
of
the touch screen is
described as
below:
When the target moves to
another position, tap and
hold at the
center
of
the new
target. Repeat each time to complete the calibration
process. When the calibration has been completed,
the device switches back to the previous operating
mode and retain the previous setting.
If
you press
Reset button, the setting will
return
to
factory setting.
TV
SECTION
ONLY FOR VR-103TNR-103BT
CAI.IBRATlON
Carefully
prqs
and
brleny
hold
atylut
on
the center
olthe
target longer than
1 second.
Connect a
TV
BOX
to the
TV
antenna jack
of
the unit. you can tap TV icon on main menu
screen or press mode on front
panel or remote.
1.
Connect
TV
antenna to the TV ANT wire
in
rear unit, and then press
MODE
button on front
panel
or remote to
select
TV mode
or
Tap
TV
icon on main menu screen to enter
TV
mode.
2.
In
TV
mode, press the Play/Pause buttons on front
panel
or
remote once to enter TV menu
setting, or press touch screen to choose
TV
MENU icon to enter
TV
MENU.
3.
Press the
t/•
on remote
or
tap the screen to
select
one
of
the setup pages: Auto program
=>
Manual
program.
20
To Next Page
Loading...
