Page 20
Select number of Occupied time periods - Press the WARMER or COOLER buttons
to choose the maximum number of Occupied time periods to program. (1-3) Press
MODE to advance to the next step.
Programming a Daily Schedule
Select Occupied 1 Cool Setpoint - Press the WARMER or COOLER buttons to adjust
the cool setpoint desired. Press MODE to advance to the next step.
Select Occupied 1 Heat Setpoint - Press the WARMER or COOLER buttons to adjust
the heat setpoint desired. Press MODE to advance to the next step.
Copy Current Day to Next - Press the WARMER button to choose to Copy the current
day to another day. Press the WARMER or COOLER buttons to choose which day to
copy to. Press MODE to confirm. Continue to Press MODE to copy to more days.
Press the COOLER button to program another day with a different schedule.
Program Another Day - Press the COOLER button to choose to program another day
with a different schedule. Press MODE. Press the WARMER or COOLER buttons to
choose the desired day. Press MODE to advance to the next step.
Press Program Button to exit Time Period Programming
To enter Time Period Programming
screens, Press PROGRAM until the
scrolling prompt appears.
SET PROGRA M
User Setup:
Time Period Programming
OFF
RUN
SET
OFF - Time Period Program is off.
RUN - Time Period Program is running.
SET - Time Period Program settings
are ready to be changed.
Select Day of Week to program - Press the WARMER or COOLER buttons to choose
the day of the week to be programmed. Press MODE to advance to the next step.
Select Occupied 1 Start Time - Press the WARMER or COOLER buttons to adjust the
time of day desired. Press MODE to advance to the next step.
Select Unoccupied Cool Setpoint - Press the WARMER or COOLER buttons to
adjust the cool setpoint desired. Press MODE to advance to the next step.
Select Unoccupied Heat Setpoint - Press the WARMER or COOLER buttons to
adjust the heat setpoint desired. Press MODE to advance to the next step.
Select Occupied 1 Stop Time - Press the WARMER or COOLER buttons to adjust the
time of day desired. Press MODE to advance to the next step.
Select Occupied 1 Enable - Press the WARMER or COOLER buttons to choose to
enable the program to run on that day. Press MODE to advance to the next step.
To Next Page
Loading...
Need help?
General
