Page 27
This feature allows the thermostat to display temperature in Fahrenheit or Celsius.
Fahrenheit or Celsius (setup step 52)
Control To Temp Source (Setup Step 38)
This feature allows the user to specify which sensor source the thermostat
will use to measure room temperature. The choices are:
Thermostat: Uses the internal thermostat
sensor only.
Remote Sensor: Uses wireless or wired sensors only.
Average Of Remote Sensor And Thermostat: Averages the temperatures of the
remote sensor(s) and the thermostat.
NOTE: If a remote sensor is being used, the degree icon on the
large room temperature display will blink.
temperature
(This feature not available on all models)
Installer Setup
To Next Page
Loading...
Need help?
General
