SA249 C4 Synth User Guide 22
Hardware Options
Clicking the gear icon in the C4 Synth’s Connections window opens the Hardware Options menu (see
the graphic below). Use the Hardware Options window to choose your pedal’s global hardware
settings.
The C4 Synth’s Hardware Options include the following:
• Preset/WYSIWYG: There are three different Preset Modes available in the C4: Standard
(Default), Preset, and WYSIWIY (“What You See Is What You Get”). Use this dropdown menu
to select the Preset Mode. For more info on the functionality of each mode, go to the Three
Different Preset Modes section.
• Hardware: Selects between two Hardware Bypass Modes: True Bypass or Active Analog
(Buffered) Bypass.
• MIDI Channel: Selects the pedal’s MIDI channel (1 through 16).
• Control Input Option: Selects the function of the external device connected to the CONTROL
INPUT port. Options include:
o Neuro Hub/Expression Pedal: Enables compatibility with the Neuro Hub (which
provides full MIDI functionality) or an external Expression Pedal (see details in the
External Control section).
o Tap Tempo: Connect the Source Audio Tap Tempo Switch to the True Spring and
sync its tremolo rates with external tap tempo control.
• External Loop Safe Mode: Check this box when using the Pre-Processing External Loop
routing option. It will prevent your effect from feeding back when engaged.
• Power Up State: Selects whether the C4 is Engaged or Bypassed during the initial power-up
process.
To Next Page
Loading...
