Source Technologies SECURE MICR PRINTER ST9630

Need help?

Do you have a question about the Source Technologies SECURE MICR PRINTER ST9630 and is the answer not in the manual?

Summary

Printer and Driver Installation

Installing the Driver

Detailed steps for running the driver installation program and completing the setup process.

Configure the Driver to enable MICR Mode

Guides on configuring the driver to send a separator page for unlocking MICR resources.

Configure the Driver to Recognize the Printer Secure Fonts

Steps to update the driver's font list to enable Windows applications to recognize secure fonts.

Configure another driver to print without MICR toner

Quality Issues

MICR Toner Low Alarm

Explains the printer's alert for low MICR toner and its implications.

MICR Toner Sensing

Describes how the printer detects MICR toner and reacts to regular toner.

MICR Toner

Emphasizes using only Source Technologies' MICR toner for quality and to prevent issues.

MICR Check Stock

Security Issues

MICR Features

MICR Mode

Explains the two operational states (normal and MICR) and conditions for activating MICR mode.

MICR Fonts

Details the resident E-13B and CMC7 MICR fonts and their access requirements.

Secure Fonts

Introduces Secure Numeric and ICR Secure Numeric fonts for fraud deterrence.

Entering MICR Mode

Explains the MICR Mode commands (&%STF, &%STH) required to activate MICR printing.

MICR Mode Commands

Details commands for password management, MICR definition, and setting new passwords.

Activate;Set Front Panel Combination Lock

How to activate and set a front panel combination for enhanced security.

Print MICR E-13 B Font

Command to print data using the E-13B MICR font, used in US, Canada, and Mexico.

Print MICR CMC7 Font

Command to print data using the CMC7 MICR font, used in Europe and South America.

Print Secure Numeric Font

Command to print using the Secure Numeric font, designed for check fraud deterrence.

Print ICR Secure Numeric Font

Command to print using the ICR Secure Numeric font, suitable for imaging equipment.

Load Flash Resource

Secure Flash Resource Unlock Command

DES and AES Decryption

Decryption Commands

Commands for setting decryption keys and enabling/disabling DES and AES decryption.

MICRpoint Feature

Feature for fine-tuning MICR line positioning using the printer's front panel.

IBM Host Programming Features and Examples

Hex Transfer

Allows sending PCL commands as simple text strings, automatically enabled in MICR Mode.

Escape Character Translation

Audit Trail Reports

Print Audit Report

Command to print and purge the Audit Trail Report, requiring a valid password.

Print and Purge Audit Report

Error Messages

Cartridge Related Errors

Lists error messages related to the MICR toner cartridge status.

Programming Related Errors

Lists error messages related to MICR command syntax and printer configuration.

File System Error Cant Open File

Flash Full Purge and Format

MICR Password Error

Appendix E: MICR Mode Command Summary

Appendix F: Audit Report Command Summary

Appendix G: PJL Based MICR Commands

PJL MICRJOB

Command to force specific printer settings like copy count and jam recovery for MICR jobs.

SET and DEFAULT formats for the MICRJOB command

Explains how to set MICR job behavior to ON or OFF via PJL commands.

Fonts and Secured Resources

PJL Unlock Sequence

PJL command sequence to unlock MICR font resources using a password.

PJL Re-Lock Sequence

PJL Re-Lock Sequence With A New Password Value

PCL Font Call Commands

PJL Info MICR Command

PCL Initial Set-Up

PCL Font Calls, Positioning Commands and Variable Print Data