Need help?Do you have a question about the Source Technologies ST9620 and is the answer not in the manual?
General| Print Technology | Thermal Transfer / Direct Thermal |
|---|---|
| Print Resolution | 203 dpi |
| Media Type | Label |
| Connectivity | USB, Serial, Ethernet |
| Paper Handling | Roll feed |
| Media Width | 0.75 inches |
| Dimensions | 7.5 inches |
Explains the requirements for MICR printing and how to download and install the universal driver.
Provides step-by-step instructions on how to download the universal driver from the website.
Guides the user through the InstallShield Wizard for installing the printer driver.
Details how to configure the driver to use a separator page for MICR mode.
Explains how to update the driver's font list to recognize secure fonts.
Explains the structure and placement of the MICR line and its various fields.
Provides advice for firms accepting checks, including awareness of damaged MICR lines and safeguarding stock.
Explains the two operational states (normal and MICR mode) and conditions for activating MICR mode.
Introduces resident MICR fonts (E-13B, CMC7) and their access requirements.
Describes Secure Numeric Font and ICR Secure Numeric Font for fraud deterrence.
Provides detailed instructions on using the MICRpoint feature for precise MICR line positioning.
Details the MICR Mode commands (&%STF, &%STH) required to activate MICR mode.
Lists and explains MICR Mode commands for Password, MICR Definition, and Set New Password.
Explains how to activate and set the front panel combination lock for security.
Details the command to print data in the E-13B MICR font.
Describes the command to print data in the CMC7 MICR font.
Details the command for printing data using the Secure Numeric Font.
Explains the command to format Flash memory, cautioning that all content will be lost.
Discusses DES and AES encryption support for secure MICR printers.
Explains how Hex Transfer allows sending PCL commands via simple text strings.
Explains how to print and purge the Audit Trail Report via the host application.
Lists error messages related to the printer's PC kit and MICR toner cartridge.
Explains the PJL MICRJOB command and its SET/DEFAULT formats.
To Next Page