Source Technologies, LLC ST9620 Secure MICR Printer User’s Guide
42
Hex Transfer Examples
&&??&% This command enables Hex Transfer On
&%1B 26 6C 34 48 $
-or-
&% 1B $& l 4H
Sends the PCL Esc sequence–
<Esc>&l4H
–which is a paper source command identifying the tray from
which the paper will be pulled.
&% 1B 45$
-or-
&% 1B $E
This command is a printer reset PCL command which
consists of the Esc character and printable E character. It
may be sent by simply putting the Esc character in Hex.
Note: Hex Transfer can now be set ON or OFF via the MICR Menu. Please review
Section 6, MICR Menu for more information.
IBM Host Programming Features and Examples | 7
To Next Page
Loading...
